Measuring Guidelines

In order to achieve a good fit please pay particular attention to the measuring of your windows, as we cannot be held accountable for incorrect measurements.

For accuracy and perfect fit please measure in centimetres and /or millimetres with a steel tape measure.

Inside Recess

Please measure the inside of the recess width and drop with no deductions, as we will deduct the appropriate measurements. It is advised to measure the recess in two or three different places and send us the smallest measurement.

Outside Recess

Please decide the distance you require the blind to overlap the recess and send us the width and drop you require the blind to be.

Measuring bay windows and conservatories

When measuring a bay window please measure the full distance of A,B,C in photo above, send me the measurement stating bay window and i will adjust the blind for the angles.

When measuring a rectangular conservatory or bay window always measure the front face first.  This blind will be a recess fit and use a face fit bracket (face fit brackets are 100mm).  Then measure the width of one side and take off 100mm to allow for the bracket of the first blind eg 1000mm total width minus 100mm for brackets = 900mm.  The measurement will be a 900mm recess fit blind.  Repeat  this for other side.

 For more complex shapes please ring for advice on 01588640680.